Blog

Skyfy shares 5 tips to keep your vehicle in tip-top condition

Skyfy Technology - Keeping your vehicle in good condition

Want to know how you can keep your car in excellent condition? Read on.

  1. Accelerate slowly

According to experts, a car is most susceptible to wear and tear during the first 10 to 20 minutes. They also highlighted that the engine and the drive train are the two most affected components during this short window of time.

To help keep your vehicle in optimal condition, drivers should make it a point to keep any acceleration at either a low or medium level. Additionally, when temperatures are very high, avoid revving the engine as this will place stress on it.

Perhaps one of the most car-damaging things that a driver can do is to race the engine directly after starting the car before it has warmed up. This can cause significant wear and tear and lead to high repair costs in the long term.

  1. Check your tires regularly

To keep your tires in good shape, make it a point to avoid making abrupt turns, slamming on the brakes or accelerating rapidly from a stop. This is because the extra speed and stress that is needed to cause such manoeuvres wears down tire treads very quickly.

Drivers must also make it a point to be wary of their surroundings and avoid driving over obstacles such as potholes or large cracks. Driving over a severe pothole or a large nail can puncture your tires.

It is also necessary to monitor the air pressure of tires regularly, as this will allow them to detect any issues with them early.

  1. Keep your car key light

Often, drivers have many keys that they need to carry around. These may include a key to their office, a key to their apartment, or even a key to their relative’s house.

In addition, some may even add charms or keychains, which increases the weight of the items. Once you’ve inserted the key into the ignition, the entire weight of the keys hangs from that point.

Though not known to many, this can wear out the ignition tumblers over time. The constant wear and tear can cause the ignition switch to fail, which will increase your repair bills.

  1. Monitor coolant levels

The coolant in the car’s engine cools the vehicle through the absorption of heat. This happens through the transfer of heat to the radiator, which is then released into the air.

Coolant levels need to be monitored and checked on a regular basis. This is because a spoilt coolant can cause serious damage to the car, with the most serious possibility being complete engine failure

Over time, the coolant may acquire debris and dirt particles. When this happens, the old coolant should be changed to a new, clean coolant.

  1. Replace brake pads when necessary

The braking system consists of three components, namely the rotor, the calliper and the brake pads. The rotor is a flat, shiny disc that connects to the wheel of the car and spins when the car is moving. Once the driver presses the brake pedal, the calliper compresses the brake pads together on either side of the rotor so that the car comes to a standstill.

Due to the high friction levels between the brake pads and the rotor, the pads will soon wear out and decrease in thickness.

If left unchecked, they may wear out completely, causing the brake pads’ backing plates to grind against the rotor. This damages the braking system and can cause the brakes to fail.

To prevent this from happening, drivers should check their brake pads from time to time to ensure that they are still of sufficient thickness.

 

Copyright © 2017, Skyfy Technology Pte Ltd. All Rights Reserved.

Author: Skyfy Technology

Leave a Reply

Your email address will not be published. Required fields are marked *